Triple Layer Partition - G3 Series
System Description:
EL-KHAYYAT Drywall Partition solutions are non load bearing, light weight, easy to install, yet robust - comprising of plaster- boards screw fixed on either side to UC metal structures (Tracks and Studs), with joints taped and filled to get even smooth and homogenous surface.
Low weight in comparison to masonry walls of comparable thickness
- Enhances saving in structural design
- Suitable for high rise buildings
Quick and Easy to install
- Cost effective
- Reduced Project completion time
Performance:
Fire protection - up to 3 hrs
Sound Insulation - up to 61 dB
Enhancement of fire & acoustic performance can be achieved by increasing the number of layers of plasterboards
Filling the cavity with insulation enhances the acoustic performance. Used
as Partitions in commercial and residential buildings.
G3-Series-partition with multiple layer boards on either side of the UC metal structure.
| Item | Description |
|---|---|
| Gypsum Plasterboard | Based on the performance requirement, the plasterboard needs to be selectedFW for enhanced fire resistance; TF for enhanced Impact resistance etc. |
| Tracks | Horizontal member of UC metal structure with equal 32mm minimum flange heights. In case of deflection the Top tracks have a flange height of minimum 50mm. |
| Studs | Vertical member of UC metal structure with unequal flange heights (suitable for boxing of studs) |
| Anchors/plugs | Used for fixing the tracks to the slabs and floor respectively |
| Drywall screws | Used for screw fixing the boards to the metal structures; available as self tapping or self drilling |
| Joint tape and Filler | Used to get a even smooth and homogenous surface at the joints |
| Sealant | Applied at the perimeter areas, to achieve the necessary fire and acoustic performance |
| Insulation | Used as cavity infill to enhance sound insulation |
| Fixing channel/ Noggins | Used as backing for horizontal edge cut joints in fire rated partitions |
* Stud spacing and metal thickness will be determined by the partition height, deflection limit and lateral pressure. Min recommended metal thickness is 0.55mm for fire rated partitions.
-
Immediate Delivery!Apr 08 - Apr 12